If you have ever finished a long race, someone probably handed you a thin silver sheet and told you to wrap up in it. It crinkles. It weighs almost nothing. It feels like the most disposable thing in the bag.
Engineers at the University of Pennsylvania have been stacking that same family of plastic into one of the more promising insulators yet tested for a building on the Moon.
Not because it insulates better than everything else. It doesn’t. It got picked for a different reason entirely — and that reason is the interesting part.
What Moon Base Insulation Actually Has to Survive
The Moon is a brutal place to keep anything at a steady temperature.
According to NASA, temperatures near the lunar equator can climb past 250°F (121°C) in direct sunlight, then fall to about -208°F (-133°C) once night arrives. Inside craters at the poles, where sunlight never reaches, NASA’s Lunar Reconnaissance Orbiter has measured surfaces colder than -410°F (-246°C). A lunar night lasts about two Earth weeks, so there is no waiting it out.
There is also almost no air. On Earth, a lot of heat moves around by warming the air next to something. On the Moon there is no air to warm. Heat moves two ways instead: it radiates across empty space, and it crawls through whatever is physically touching. Good insulation up there has to block both.
And that is only the physics. The material also has to be folded into a rocket, flown a quarter of a million miles, unpacked by people in stiff gloves, and then pressed under the weight of a structure, regolith shielding, or a boot. Radiation is its own separate problem — what Artemis I measured on the way there is a reminder that the Moon has several ways to be hostile at once. Some researchers have even looked at sheltering inside natural lunar caves partly to dodge these extremes.
So the real job description is not “insulate well.” It is “insulate well and survive being handled.”
Why a Marathon Blanket, of All Things
The plastic in question is Mylar — more formally, biaxially oriented polyethylene terephthalate, or BoPET. It is ordinary stuff. It shows up in food packaging and balloons. Coat it with a thin layer of metal and it becomes very good at bouncing infrared heat back where it came from, which is exactly what the reflective blanket at a race finish line is doing when it keeps your body heat from leaving.
Worth being precise here, because it is easy to overstate: the Penn team did not pull blankets out of a first-aid kit and stack them. They worked with the same base plastic, in sheets far thinner than a blanket, and coated some of them with aluminium and others with an extremely thin layer of alumina — aluminium oxide — to stiffen them up. Same material family, engineered version.
The reason it is worth noticing at all is that this is a cheap, already-mass-produced film. Nobody had to invent it.
What the Penn Team Actually Built
The work comes from Igor Bargatin’s lab at Penn Engineering, with Danielle R. Levin as first author, and was published in ACS Applied Materials & Interfaces. Penn announced it in October 2026. They call the material a hybrid layered insulating film stack — HyLIFS.
The idea is simple enough to picture: take very thin sheets and stack a great many of them in a small space.
- The films tested were 2.5, 5 and 12.5 microns thick. A human hair is usually somewhere around 50 to 100 microns, so even the thickest of these is a fraction of that.
- The paper describes stacks with a nominal density of roughly 80 to 400 layers per millimetre.
- In a vacuum, the best stacks reached a thermal conductivity as low as 2.2 mW per metre per kelvin, measured under light compression at temperatures from 35 to 120°C. For a rough sense of scale, still air sits around 26 — so these stacks came in at something like a tenth of plain, undisturbed air.
- Then they squeezed them. The stacks were compressed to about 20 megapascals — Penn described that as roughly 200 pounds of force, around 90 kilograms, pressed onto an area the size of a fingertip.
That last test is the one that matters most, and Levin’s description of the result is the line worth keeping: “But the stacks didn’t survive just one high stress cycle — they survived 10 in a row.”
The coated stacks held onto their insulating performance through all of it.
The One Result the Team Did Not Expect
Here is where the story stops being tidy.
If stacking thin sheets is the trick, then thinner sheets should win. Thinner film means more layers in the same gap, more layers means more barriers, and more barriers should mean better insulation. That was the expectation.
It did not happen. The thinnest films the team successfully measured performed about the same as the medium-thickness ones once they were coated with alumina.
The suspected culprit is a detail that has nothing to do with space at all. Film manufacturers add microscopic “antiblocking” particles to thin plastic sheets for a completely unrelated reason: without them, the film sticks to itself on the roll and is impossible to work with on a factory floor. Those particles poke very slightly out of the surface. In a vacuum, where there is no air to carry heat, the team’s models and measurements point to those tiny protruding specks as the main road heat takes from one sheet to the next.
Thinner film has more sheets, which means more particles, which means more contact points, which means more places for heat to cross. The advantage of going thinner got eaten by a manufacturing additive nobody put there for a thermal reason.
So the clever, maximally optimised version lost to the plain one. As Levin put it: “The simplest configuration ended up being the best one.”
What It Still Cannot Do
This is early-stage work, and the researchers are clear about that.
- The samples are roughly one square centimetre, and they are stacked by hand over a matter of hours. Real insulation would need sheets measured in metres, which means a different manufacturing method entirely — something like continuous roll coating.
- How the stacks behave at that scale is unknown. So is whether they survive repeated bending, or the ordinary scuffs and knocks of being used by people.
- The thermal results were taken in a vacuum under compression reflecting indoor atmospheric pressure, not under the full loads a finished structure would apply.
- And the central trade-off has not been abolished, only softened. Making an insulator tougher still tends to cost you some insulating performance.
Nothing here says Mylar is going to the Moon. It says a cheap, boring, already-available film did unexpectedly well on the one test the fancier options keep failing.
What Strength Was Really Being Measured By
It is worth asking why the obvious candidates lost.
Aerogel is a better insulator than this. It is mostly empty space, and it is extraordinary at stopping heat. It is also so fragile that it can be damaged by ordinary handling. Multilayer insulation — the shiny stuff already wrapped around spacecraft — is excellent at blocking radiated heat, and it tears if you touch it wrong and cannot carry a meaningful load.
Both of them beat Mylar at the thing everyone measures. Both of them lose at the thing the job actually requires.
That is a quietly uncomfortable idea, because it means the ranking everyone trusted was measuring the wrong quality. The winner was not the strongest performer. It was the one that could be packed, shipped, dropped, pressed and still do its work afterward.
There is a very old thought, far older than any of this engineering, that God tends to pick exactly the things the world has already set aside — not because being overlooked is some kind of virtue, but because the world keeps grading on the wrong test. Nobody holding a crinkly sheet in a race-finish bag would have guessed it was on a shortlist for the Moon.
Where That Leaves You on an Ordinary Day
Most of us have been the thing in the bag at some point. The last one picked. The one in the room with no impressive line on the CV, doing the quiet arithmetic: everyone here is better at this than I am, and they probably all know it.
What that arithmetic never includes is the test it is being graded on. The aerogel was better. It still could not take being handled. Whatever it is you keep doing anyway — showing up, finishing the shift, staying steady when things press down — is not nothing just because it is not the thing the room is applauding. It might simply be a quality nobody in the room thought to measure yet.
If that quiet “I’m the weak link here” voice is familiar, our free Do I Have Imposter Syndrome? check takes about two minutes and is sometimes clarifying in a way reassurance is not.
And somewhere in a lab in Philadelphia, there is a one-centimetre square of stacked plastic that has been crushed ten times and still insulates. Hand-built. Unglamorous. Holding.
Questions People Ask About Moon Base Insulation
What is moon base insulation made of?
There is no finished lunar insulation yet, because no permanent Moon base exists. Spacecraft today typically use multilayer insulation, made of reflective films separated by spacers. Researchers at the University of Pennsylvania published work in 2026 on an alternative made from stacks of thin Mylar film — the same plastic family used in reflective emergency blankets — some of it coated with aluminium or a very thin layer of alumina. They call it a hybrid layered insulating film stack, or HyLIFS.
How hot and cold does the Moon get?
NASA reports that temperatures near the Moon’s equator can rise above 250°F (121°C) in direct sunlight and drop to roughly -208°F (-133°C) after nightfall. In permanently shadowed craters near the lunar poles, NASA’s Lunar Reconnaissance Orbiter has measured surfaces colder than -410°F (-246°C). A lunar day and night each last about two Earth weeks.
Can you really use an emergency blanket as space insulation?
Not straight off the shelf. A race or first-aid blanket is metal-coated Mylar, and Mylar is genuinely the base material the Penn Engineering researchers stacked — but they used engineered sheets of specific thicknesses, 2.5 to 12.5 microns, with added coatings, assembled into dense stacks in a laboratory. The useful finding is that an ordinary, cheap, already-mass-produced plastic performed well, not that a consumer blanket is flight-ready.
Why did the thinnest films not insulate the best?
The Penn researchers expected thinner sheets to win, because thinner film fits more layers into the same space. Instead, the thinnest films they measured performed about the same as medium-thickness ones when coated with alumina. The likely reason is microscopic “antiblocking” particles that manufacturers add to thin plastic film to stop it sticking to itself on the roll. Those particles protrude slightly, and in a vacuum they appear to be the main pathway heat uses to cross from one sheet to the next — so more sheets means more contact points and more heat leakage.
Is this material ready to be used on the Moon?
No. The published samples are about one square centimetre and are assembled by hand over several hours. Practical use would require sheets measured in metres and a continuous manufacturing process such as roll coating. It is also not yet known how the stacks handle repeated bending or real-world wear at full scale. The 2026 result is a promising laboratory finding, not a flight-ready product.
Something to Talk About
In this case the “best” material lost to the one that could take a beating. Where else do you think we rank things by the wrong measurement — in hiring, in school, in sport, in who gets taken seriously at work? Leave a comment and tell us where you have seen it.
Share This
Found this interesting? Here are a few ways to pass it on:
- The best insulator for a Moon base might be the crinkly foil sheet they hand out at the end of a marathon. Not because it insulates best — because it’s the only one that survives being handled.
- Penn engineers expected the thinnest plastic film to insulate best. It didn’t. The thing in the way was a microscopic additive manufacturers put in film so it doesn’t stick to itself on the roll. The simplest version won.
- Aerogel is a better insulator than Mylar and still lost the job, because it can’t survive being touched. Worth asking how often we rank things by a measurement that isn’t the one that matters.
Sources: Penn Engineering; Levin et al., “Robust Layered Thermal Insulator Film Stacks for Vacuum Applications,” ACS Applied Materials & Interfaces, 2026, 18(36), 48946 (DOI 10.1021/acsami.6c09126); NASA, Weather on the Moon.